1996 Chrysler Cirrus vs. 1968 Holden Belmont
To start off, 1996 Chrysler Cirrus is newer by 28 year(s). Which means there will be less support and parts availability for 1968 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1968 Holden Belmont would be higher. At 2,497 cc (6 cylinders), 1996 Chrysler Cirrus is equipped with a bigger engine. In terms of performance, 1996 Chrysler Cirrus (168 HP @ 5800 RPM) has 92 more horse power than 1968 Holden Belmont. (76 HP @ 4400 RPM). In normal driving conditions, 1996 Chrysler Cirrus should accelerate faster than 1968 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 1996 Chrysler Cirrus weights approximately 234 kg more than 1968 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Holden Belmont is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Holden Belmont. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Cirrus, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Chrysler Cirrus (230 Nm @ 4350 RPM) has 67 more torque (in Nm) than 1968 Holden Belmont. (163 Nm @ 4400 RPM). This means 1996 Chrysler Cirrus will have an easier job in driving up hills or pulling heavy equipment than 1968 Holden Belmont. 1996 Chrysler Cirrus has automatic transmission and 1968 Holden Belmont has manual transmission. 1968 Holden Belmont will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Chrysler Cirrus will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Cirrus | 1968 Holden Belmont | |
Make | Chrysler | Holden |
Model | Cirrus | Belmont |
Year Released | 1996 | 1968 |
Engine Position | Front | Front |
Engine Size | 2497 cc | 2130 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | in-line |
Horse Power | 168 HP | 76 HP |
Engine RPM | 5800 RPM | 4400 RPM |
Torque | 230 Nm | 163 Nm |
Torque RPM | 4350 RPM | 4400 RPM |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1434 kg | 1200 kg |
Vehicle Length | 4730 mm | 4700 mm |
Vehicle Width | 1830 mm | 1830 mm |
Vehicle Height | 1340 mm | 1420 mm |
Wheelbase Size | 2750 mm | 2830 mm |