1996 Chrysler Cirrus vs. 1973 Subaru R-2

To start off, 1996 Chrysler Cirrus is newer by 23 year(s). Which means there will be less support and parts availability for 1973 Subaru R-2. In addition, the cost of maintenance, including insurance, on 1973 Subaru R-2 would be higher. At 2,497 cc (6 cylinders), 1996 Chrysler Cirrus is equipped with a bigger engine. In terms of performance, 1996 Chrysler Cirrus (168 HP @ 5800 RPM) has 141 more horse power than 1973 Subaru R-2. (27 HP @ 6000 RPM). In normal driving conditions, 1996 Chrysler Cirrus should accelerate faster than 1973 Subaru R-2. With that said, vehicle weight also plays an important factor in acceleration. 1996 Chrysler Cirrus weights approximately 974 kg more than 1973 Subaru R-2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1973 Subaru R-2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Subaru R-2. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Cirrus, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Chrysler Cirrus (230 Nm @ 4350 RPM) has 190 more torque (in Nm) than 1973 Subaru R-2. (40 Nm @ 5000 RPM). This means 1996 Chrysler Cirrus will have an easier job in driving up hills or pulling heavy equipment than 1973 Subaru R-2. 1996 Chrysler Cirrus has automatic transmission and 1973 Subaru R-2 has manual transmission. 1973 Subaru R-2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Chrysler Cirrus will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Chrysler Cirrus 1973 Subaru R-2
Make Chrysler Subaru
Model Cirrus R-2
Year Released 1996 1973
Body Type Sedan Hatchback
Engine Position Front Rear
Engine Size 2497 cc 356 cc
Engine Cylinders 6 cylinders 2 cylinders
Engine Type V in-line
Horse Power 168 HP 27 HP
Engine RPM 5800 RPM 6000 RPM
Torque 230 Nm 40 Nm
Torque RPM 4350 RPM 5000 RPM
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1434 kg 460 kg
Vehicle Length 4730 mm 3000 mm
Vehicle Width 1830 mm 1300 mm
Vehicle Height 1340 mm 1350 mm
Wheelbase Size 2750 mm 1930 mm