1996 Chrysler Sebring vs. 1966 Chrysler New Yorker
To start off, 1996 Chrysler Sebring is newer by 30 year(s). Which means there will be less support and parts availability for 1966 Chrysler New Yorker. In addition, the cost of maintenance, including insurance, on 1966 Chrysler New Yorker would be higher. At 7,205 cc (8 cylinders), 1966 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 1966 Chrysler New Yorker (350 HP @ 4400 RPM) has 212 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 1966 Chrysler New Yorker should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1966 Chrysler New Yorker weights approximately 646 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Chrysler New Yorker is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Chrysler New Yorker. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Chrysler New Yorker (651 Nm @ 2800 RPM) has 475 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 1966 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 1966 Chrysler New Yorker has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Chrysler New Yorker will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 1966 Chrysler New Yorker | |
Make | Chrysler | Chrysler |
Model | Sebring | New Yorker |
Year Released | 1996 | 1966 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 7205 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 138 HP | 350 HP |
Engine RPM | 6000 RPM | 4400 RPM |
Torque | 176 Nm | 651 Nm |
Torque RPM | 4800 RPM | 2800 RPM |
Engine Bore Size | 87.5 mm | 109.7 mm |
Engine Stroke Size | 83 mm | 95.3 mm |
Engine Compression Ratio | 9.6:1 | 9.7:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1310 kg | 1956 kg |
Vehicle Length | 4770 mm | 5570 mm |
Vehicle Width | 1780 mm | 2030 mm |