1996 Chrysler Sebring vs. 1983 Holden Statesman
To start off, 1996 Chrysler Sebring is newer by 13 year(s). Which means there will be less support and parts availability for 1983 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1983 Holden Statesman would be higher. At 5,042 cc (8 cylinders), 1983 Holden Statesman is equipped with a bigger engine. In terms of performance, 1983 Holden Statesman (169 HP @ 4400 RPM) has 31 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 1983 Holden Statesman should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1983 Holden Statesman weights approximately 410 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1983 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1983 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 Holden Statesman (361 Nm @ 2800 RPM) has 185 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 1983 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 1983 Holden Statesman has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 1983 Holden Statesman | |
Make | Chrysler | Holden |
Model | Sebring | Statesman |
Year Released | 1996 | 1983 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 5042 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 138 HP | 169 HP |
Engine RPM | 6000 RPM | 4400 RPM |
Torque | 176 Nm | 361 Nm |
Torque RPM | 4800 RPM | 2800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1310 kg | 1720 kg |
Vehicle Length | 4770 mm | 5160 mm |
Vehicle Width | 1780 mm | 1910 mm |