1996 Chrysler Sebring vs. 1995 Mercedes-Benz SL
To start off, 1996 Chrysler Sebring is newer by 1 year(s). Which means there will be less support and parts availability for 1995 Mercedes-Benz SL. In addition, the cost of maintenance, including insurance, on 1995 Mercedes-Benz SL would be higher. At 2,799 cc (6 cylinders), 1995 Mercedes-Benz SL is equipped with a bigger engine. In terms of performance, 1995 Mercedes-Benz SL (190 HP @ 5500 RPM) has 52 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 1995 Mercedes-Benz SL should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1995 Mercedes-Benz SL weights approximately 520 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1995 Mercedes-Benz SL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1995 Mercedes-Benz SL. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Mercedes-Benz SL (270 Nm @ 3750 RPM) has 94 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 1995 Mercedes-Benz SL will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 1995 Mercedes-Benz SL has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1995 Mercedes-Benz SL will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 1995 Mercedes-Benz SL | |
Make | Chrysler | Mercedes-Benz |
Model | Sebring | SL |
Year Released | 1996 | 1995 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 2799 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 138 HP | 190 HP |
Engine RPM | 6000 RPM | 5500 RPM |
Torque | 176 Nm | 270 Nm |
Torque RPM | 4800 RPM | 3750 RPM |
Engine Bore Size | 87.5 mm | 89.9 mm |
Engine Stroke Size | 83 mm | 73.5 mm |
Engine Compression Ratio | 9.6:1 | 10.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 2 seats |
Vehicle Weight | 1310 kg | 1830 kg |
Vehicle Length | 4770 mm | 4510 mm |
Vehicle Width | 1780 mm | 1820 mm |