1996 Chrysler Sebring vs. 2000 Mercedes-Benz E
To start off, 2000 Mercedes-Benz E is newer by 4 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 1,998 cc (4 cylinders), 2000 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2000 Mercedes-Benz E (160 HP @ 5300 RPM) has 22 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2000 Mercedes-Benz E should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2000 Mercedes-Benz E weights approximately 290 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2000 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Mercedes-Benz E (230 Nm @ 2500 RPM) has 54 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2000 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2000 Mercedes-Benz E has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 2000 Mercedes-Benz E | |
Make | Chrysler | Mercedes-Benz |
Model | Sebring | E |
Year Released | 1996 | 2000 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 1998 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 138 HP | 160 HP |
Engine RPM | 6000 RPM | 5300 RPM |
Torque | 176 Nm | 230 Nm |
Torque RPM | 4800 RPM | 2500 RPM |
Engine Bore Size | 87.5 mm | 90 mm |
Engine Stroke Size | 83 mm | 78.7 mm |
Engine Compression Ratio | 9.6:1 | 9.5:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1310 kg | 1600 kg |
Vehicle Length | 4770 mm | 4820 mm |
Vehicle Width | 1780 mm | 1810 mm |