1996 Chrysler Sebring vs. 2004 Chrysler 300
To start off, 2004 Chrysler 300 is newer by 8 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 2,736 cc (6 cylinders), 2004 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2004 Chrysler 300 (190 HP @ 6400 RPM) has 52 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2004 Chrysler 300 should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2004 Chrysler 300 weights approximately 425 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2004 Chrysler 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2004 Chrysler 300. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 Chrysler 300 (258 Nm @ 4000 RPM) has 82 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2004 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2004 Chrysler 300 has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2004 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 2004 Chrysler 300 | |
Make | Chrysler | Chrysler |
Model | Sebring | 300 |
Year Released | 1996 | 2004 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 2736 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 138 HP | 190 HP |
Engine RPM | 6000 RPM | 6400 RPM |
Torque | 176 Nm | 258 Nm |
Torque RPM | 4800 RPM | 4000 RPM |
Engine Bore Size | 87.5 mm | 86.1 mm |
Engine Stroke Size | 83 mm | 78 mm |
Engine Compression Ratio | 9.6:1 | 9.7:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1310 kg | 1735 kg |
Vehicle Length | 4770 mm | 5010 mm |
Vehicle Width | 1780 mm | 1890 mm |