1996 Chrysler Sebring vs. 2006 Mercedes-Benz CL

To start off, 2006 Mercedes-Benz CL is newer by 10 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 5,513 cc (12 cylinders), 2006 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2006 Mercedes-Benz CL (494 HP @ 5000 RPM) has 356 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2006 Mercedes-Benz CL should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2006 Mercedes-Benz CL weights approximately 575 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2006 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mercedes-Benz CL (800 Nm @ 1800 RPM) has 624 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2006 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2006 Mercedes-Benz CL has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Mercedes-Benz CL will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Chrysler Sebring 2006 Mercedes-Benz CL
Make Chrysler Mercedes-Benz
Model Sebring CL
Year Released 1996 2006
Engine Position Front Front
Engine Size 1996 cc 5513 cc
Engine Cylinders 4 cylinders 12 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 3 valves
Horse Power 138 HP 494 HP
Engine RPM 6000 RPM 5000 RPM
Torque 176 Nm 800 Nm
Torque RPM 4800 RPM 1800 RPM
Engine Bore Size 87.5 mm 82 mm
Engine Stroke Size 83 mm 87 mm
Engine Compression Ratio 9.6:1 9.0:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Vehicle Weight 1310 kg 1885 kg
Vehicle Length 4770 mm 5000 mm
Vehicle Width 1780 mm 1860 mm