1996 Chrysler Sebring vs. 2010 BMW 120
To start off, 2010 BMW 120 is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 1,996 cc (4 cylinders), 1996 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 BMW 120 (155 HP @ 6700 RPM) has 17 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2010 BMW 120 should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 120 weights approximately 75 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 BMW 120 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 120. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 120 (200 Nm @ 4250 RPM) has 24 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2010 BMW 120 will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2010 BMW 120 has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 BMW 120 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1996 Chrysler Sebring | 2010 BMW 120 | |
| Make | Chrysler | BMW |
| Model | Sebring | 120 |
| Year Released | 1996 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1996 cc | 1995 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 138 HP | 155 HP |
| Engine RPM | 6000 RPM | 6700 RPM |
| Torque | 176 Nm | 200 Nm |
| Torque RPM | 4800 RPM | 4250 RPM |
| Engine Bore Size | 87.5 mm | 84 mm |
| Engine Stroke Size | 83 mm | 90 mm |
| Engine Compression Ratio | 9.6:1 | 12.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 4 seats |
| Vehicle Weight | 1310 kg | 1385 kg |
| Vehicle Length | 4770 mm | 4250 mm |
| Vehicle Width | 1780 mm | 1430 mm |
