1996 Chrysler Sebring vs. 2010 Cadillac Escalade
To start off, 2010 Cadillac Escalade is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 6,000 cc (8 cylinders), 2010 Cadillac Escalade is equipped with a bigger engine. In terms of performance, 2010 Cadillac Escalade (332 HP @ 5100 RPM) has 194 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2010 Cadillac Escalade should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Cadillac Escalade weights approximately 1364 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Cadillac Escalade is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Cadillac Escalade. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Cadillac Escalade (497 Nm @ 4100 RPM) has 321 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2010 Cadillac Escalade will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2010 Cadillac Escalade has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Cadillac Escalade will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 2010 Cadillac Escalade | |
Make | Chrysler | Cadillac |
Model | Sebring | Escalade |
Year Released | 1996 | 2010 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 6000 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 138 HP | 332 HP |
Engine RPM | 6000 RPM | 5100 RPM |
Torque | 176 Nm | 497 Nm |
Torque RPM | 4800 RPM | 4100 RPM |
Fuel Type | Gasoline | Gasoline / Electric Hybrid |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Vehicle Weight | 1310 kg | 2674 kg |
Vehicle Length | 4770 mm | 5144 mm |
Vehicle Width | 1780 mm | 2007 mm |