1996 Chrysler Sebring vs. 2010 Jeep Commander

To start off, 2010 Jeep Commander is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 2,987 cc (6 cylinders), 2010 Jeep Commander is equipped with a bigger engine. In terms of performance, 2010 Jeep Commander (215 HP @ 4000 RPM) has 77 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2010 Jeep Commander should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Jeep Commander weights approximately 1045 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Jeep Commander is four wheel drive (4WD), it will have significant more traction and grip than 1996 Chrysler Sebring. In wet, icy, snow, or gravel driving conditions, 2010 Jeep Commander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Jeep Commander (510 Nm @ 1600 RPM) has 334 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2010 Jeep Commander will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2010 Jeep Commander has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Jeep Commander will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Chrysler Sebring 2010 Jeep Commander
Make Chrysler Jeep
Model Sebring Commander
Year Released 1996 2010
Engine Position Front Front
Engine Size 1996 cc 2987 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 138 HP 215 HP
Engine RPM 6000 RPM 4000 RPM
Torque 176 Nm 510 Nm
Torque RPM 4800 RPM 1600 RPM
Engine Bore Size 87.5 mm 83 mm
Engine Stroke Size 83 mm 92 mm
Engine Compression Ratio 9.6:1 17.7:1
Fuel Type Gasoline Diesel
Drive Type Front 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 7 seats
Vehicle Weight 1310 kg 2355 kg
Vehicle Length 4770 mm 4790 mm
Vehicle Width 1780 mm 1910 mm