1996 Chrysler Sebring vs. 2010 Jeep Commander
To start off, 2010 Jeep Commander is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 5,654 cc (8 cylinders), 2010 Jeep Commander is equipped with a bigger engine. In terms of performance, 2010 Jeep Commander (358 HP @ 5200 RPM) has 220 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2010 Jeep Commander should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Jeep Commander weights approximately 733 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Jeep Commander is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Jeep Commander. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Jeep Commander (527 Nm @ 4350 RPM) has 351 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2010 Jeep Commander will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2010 Jeep Commander has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Jeep Commander will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 2010 Jeep Commander | |
Make | Chrysler | Jeep |
Model | Sebring | Commander |
Year Released | 1996 | 2010 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 5654 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 138 HP | 358 HP |
Engine RPM | 6000 RPM | 5200 RPM |
Torque | 176 Nm | 527 Nm |
Torque RPM | 4800 RPM | 4350 RPM |
Engine Compression Ratio | 9.6:1 | 9.6:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Vehicle Weight | 1310 kg | 2043 kg |
Vehicle Length | 4770 mm | 4790 mm |
Vehicle Width | 1780 mm | 1910 mm |