1996 Chrysler Sebring vs. 2010 Mercedes-Benz ML
To start off, 2010 Mercedes-Benz ML is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 3,500 cc (6 cylinders), 2010 Mercedes-Benz ML is equipped with a bigger engine. In terms of performance, 2010 Mercedes-Benz ML (268 HP @ 6000 RPM) has 130 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2010 Mercedes-Benz ML should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercedes-Benz ML weights approximately 824 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Mercedes-Benz ML is all wheel drive (AWD), it will have significant more traction and grip than 1996 Chrysler Sebring. In wet, icy, snow, or gravel driving conditions, 2010 Mercedes-Benz ML will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mercedes-Benz ML (349 Nm @ 2400 RPM) has 173 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2010 Mercedes-Benz ML will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2010 Mercedes-Benz ML has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercedes-Benz ML will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 2010 Mercedes-Benz ML | |
Make | Chrysler | Mercedes-Benz |
Model | Sebring | ML |
Year Released | 1996 | 2010 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 3500 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 138 HP | 268 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 176 Nm | 349 Nm |
Torque RPM | 4800 RPM | 2400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | AWD |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1310 kg | 2134 kg |
Vehicle Length | 4770 mm | 4780 mm |
Vehicle Width | 1780 mm | 1910 mm |