1996 Chrysler Sebring vs. 2012 SsangYong Rexton
To start off, 2012 SsangYong Rexton is newer by 16 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 2,696 cc (5 cylinders), 2012 SsangYong Rexton is equipped with a bigger engine. In terms of performance, 2012 SsangYong Rexton (161 HP @ 4000 RPM) has 23 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2012 SsangYong Rexton should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2012 SsangYong Rexton weights approximately 662 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 SsangYong Rexton is four wheel drive (4WD), it will have significant more traction and grip than 1996 Chrysler Sebring. In wet, icy, snow, or gravel driving conditions, 2012 SsangYong Rexton will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 SsangYong Rexton (345 Nm @ 1800 RPM) has 169 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2012 SsangYong Rexton will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2012 SsangYong Rexton has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 SsangYong Rexton will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 2012 SsangYong Rexton | |
Make | Chrysler | SsangYong |
Model | Sebring | Rexton |
Year Released | 1996 | 2012 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 2696 cc |
Engine Cylinders | 4 cylinders | 5 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 138 HP | 161 HP |
Engine RPM | 6000 RPM | 4000 RPM |
Torque | 176 Nm | 345 Nm |
Torque RPM | 4800 RPM | 1800 RPM |
Engine Bore Size | 87.5 mm | 86.2 mm |
Engine Stroke Size | 83 mm | 92.4 mm |
Engine Compression Ratio | 9.6:1 | 17.5:1 |
Fuel Type | Gasoline | Diesel |
Drive Type | Front | 4WD |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Vehicle Weight | 1310 kg | 1972 kg |
Vehicle Length | 4770 mm | 4790 mm |
Vehicle Width | 1780 mm | 1880 mm |