1996 Chrysler Sebring vs. 2013 Chevrolet Avalanche
To start off, 2013 Chevrolet Avalanche is newer by 17 year(s). Which means there will be less support and parts availability for 1996 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Sebring would be higher. At 5,328 cc (8 cylinders), 2013 Chevrolet Avalanche is equipped with a bigger engine. In terms of performance, 2013 Chevrolet Avalanche (316 HP @ 5400 RPM) has 178 more horse power than 1996 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2013 Chevrolet Avalanche should accelerate faster than 1996 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chevrolet Avalanche weights approximately 1249 kg more than 1996 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Chevrolet Avalanche is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Chevrolet Avalanche. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chevrolet Avalanche (454 Nm @ 4000 RPM) has 278 more torque (in Nm) than 1996 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 2013 Chevrolet Avalanche will have an easier job in driving up hills or pulling heavy equipment than 1996 Chrysler Sebring. 2013 Chevrolet Avalanche has automatic transmission and 1996 Chrysler Sebring has manual transmission. 1996 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chevrolet Avalanche will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Sebring | 2013 Chevrolet Avalanche | |
Make | Chrysler | Chevrolet |
Model | Sebring | Avalanche |
Year Released | 1996 | 2013 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 5328 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 138 HP | 316 HP |
Engine RPM | 6000 RPM | 5400 RPM |
Torque | 176 Nm | 454 Nm |
Torque RPM | 4800 RPM | 4000 RPM |
Engine Bore Size | 87.5 mm | 96 mm |
Engine Stroke Size | 83 mm | 92 mm |
Engine Compression Ratio | 9.6:1 | 10 |
Fuel Type | Gasoline | Flex Fuel |
Drive Type | Front | Rear |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1310 kg | 2559 kg |
Vehicle Length | 4770 mm | 5621 mm |
Vehicle Width | 1780 mm | 2009 mm |