1996 Chrysler Viper vs. 2013 Porsche 911

To start off, 2013 Porsche 911 is newer by 17 year(s). Which means there will be less support and parts availability for 1996 Chrysler Viper. In addition, the cost of maintenance, including insurance, on 1996 Chrysler Viper would be higher. At 7,986 cc (10 cylinders), 1996 Chrysler Viper is equipped with a bigger engine. In terms of performance, 1996 Chrysler Viper (389 HP @ 5150 RPM) has 44 more horse power than 2013 Porsche 911. (345 HP @ 7400 RPM). In normal driving conditions, 1996 Chrysler Viper should accelerate faster than 2013 Porsche 911. With that said, vehicle weight also plays an important factor in acceleration. 1996 Chrysler Viper weights approximately 140 kg more than 2013 Porsche 911. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 Chrysler Viper is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Chrysler Viper. However, in wet, icy, snow, or gravel driving conditions, 2013 Porsche 911, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Chrysler Viper (620 Nm @ 3600 RPM) has 230 more torque (in Nm) than 2013 Porsche 911. (390 Nm @ 5600 RPM). This means 1996 Chrysler Viper will have an easier job in driving up hills or pulling heavy equipment than 2013 Porsche 911. 2013 Porsche 911 has automatic transmission and 1996 Chrysler Viper has manual transmission. 1996 Chrysler Viper will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Porsche 911 will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Chrysler Viper 2013 Porsche 911
Make Chrysler Porsche
Model Viper 911
Year Released 1996 2013
Body Type Roadster Convertible
Engine Position Front Front
Engine Size 7986 cc 3800 cc
Engine Cylinders 10 cylinders 6 cylinders
Engine Type V boxer
Valves per Cylinder 2 valves 4 valves
Horse Power 389 HP 345 HP
Engine RPM 5150 RPM 7400 RPM
Torque 620 Nm 390 Nm
Torque RPM 3600 RPM 5600 RPM
Fuel Type Gasoline Diesel
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1590 kg 1450 kg
Vehicle Length 4460 mm 4491 mm
Vehicle Width 1930 mm 1978 mm
Vehicle Height 1130 mm 1299 mm
Wheelbase Size 2450 mm 2450 mm