1996 Fiat Coupe vs. 1996 Honda CR-V

To start off, both 1996 Fiat Coupe and 1996 Honda CR-V were released in the same year (1996). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,999 cc (4 cylinders), 1996 Honda CR-V is equipped with a bigger engine. In terms of performance, 1996 Fiat Coupe (216 HP) has 88 more horse power than 1996 Honda CR-V. (128 HP). In normal driving conditions, 1996 Fiat Coupe should accelerate faster than 1996 Honda CR-V. With that said, vehicle weight also plays an important factor in acceleration. 1996 Honda CR-V weights approximately 190 kg more than 1996 Fiat Coupe.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Fiat Coupe (311 Nm) has 131 more torque (in Nm) than 1996 Honda CR-V. (180 Nm). This means 1996 Fiat Coupe will have an easier job in driving up hills or pulling heavy equipment than 1996 Honda CR-V.

Compare all specifications:

1996 Fiat Coupe 1996 Honda CR-V
Make Fiat Honda
Model Coupe CR-V
Year Released 1996 1996
Body Type Coupe SUV
Engine Position Front Front
Engine Size 1998 cc 1999 cc
Engine Cylinders 5 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 216 HP 128 HP
Torque 311 Nm 180 Nm
Engine Bore Size 82 mm 84 mm
Fuel Type Gasoline Gasoline
Top Speed 250 km/hour 193 km/hour
Acceleration 0-100mph 6.5 seconds 10.2 seconds
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1310 kg 1500 kg
Vehicle Length 4260 mm 4560 mm
Vehicle Width 1770 mm 1780 mm
Vehicle Height 1350 mm 1700 mm
Wheelbase Size 2670 mm 2620 mm