1996 Fiat Coupe vs. 2008 Ford Crown Victoria
To start off, 2008 Ford Crown Victoria is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1996 Fiat Coupe would be higher. At 4,601 cc (8 cylinders), 2008 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2008 Ford Crown Victoria (225 HP @ 4800 RPM) has 9 more horse power than 1996 Fiat Coupe. (216 HP @ 5750 RPM) In normal driving conditions, 2008 Ford Crown Victoria should accelerate faster than 1996 Fiat Coupe. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Crown Victoria weights approximately 530 kg more than 1996 Fiat Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1996 Fiat Coupe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Crown Victoria (369 Nm @ 4000 RPM) has 58 more torque (in Nm) than 1996 Fiat Coupe. (311 Nm @ 2500 RPM). This means 2008 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1996 Fiat Coupe. 2008 Ford Crown Victoria has automatic transmission and 1996 Fiat Coupe has manual transmission. 1996 Fiat Coupe will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Fiat Coupe | 2008 Ford Crown Victoria | |
Make | Fiat | Ford |
Model | Coupe | Crown Victoria |
Year Released | 1996 | 2008 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 1998 cc | 4601 cc |
Engine Cylinders | 5 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 216 HP | 225 HP |
Engine RPM | 5750 RPM | 4800 RPM |
Torque | 311 Nm | 369 Nm |
Torque RPM | 2500 RPM | 4000 RPM |
Engine Bore Size | 82 mm | 90.2 mm |
Engine Stroke Size | 75.7 mm | 89.9 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1310 kg | 1840 kg |
Vehicle Length | 4260 mm | 5390 mm |
Vehicle Width | 1770 mm | 2000 mm |
Vehicle Height | 1350 mm | 1490 mm |
Wheelbase Size | 2670 mm | 2920 mm |
Fuel Consumption Overall | 9.4 L/100km | 11.8 L/100km |
Fuel Tank Capacity | 63 L | 72 L |