1996 Fiat Coupe vs. 2008 Mazda Etude
To start off, 2008 Mazda Etude is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1996 Fiat Coupe would be higher. At 1,995 cc (4 cylinders), 1996 Fiat Coupe is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1996 Fiat Coupe weights approximately 197 kg more than 2008 Mazda Etude.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Fiat Coupe (302 Nm @ 3400 RPM) has 139 more torque (in Nm) than 2008 Mazda Etude. (163 Nm @ 4000 RPM). This means 1996 Fiat Coupe will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda Etude.
Compare all specifications:
| 1996 Fiat Coupe | 2008 Mazda Etude | |
| Make | Fiat | Mazda |
| Model | Coupe | Etude |
| Year Released | 1996 | 2008 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1995 cc | 1839 cc |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 193 HP | 0 HP |
| Torque | 302 Nm | 163 Nm |
| Torque RPM | 3400 RPM | 4000 RPM |
| Engine Compression Ratio | 10.0:1 | 9.6:1 |
| Top Speed | 212 km/hour | 194 km/hour |
| Acceleration 0-100mph | 8.9 seconds | 10.7 seconds |
| Drive Type | Front | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1290 kg | 1093 kg |
| Wheelbase Size | 2550 mm | 2620 mm |
| Fuel Tank Capacity | 63 L | 55 L |
