1996 Fiat Coupe vs. 2008 Peugeot 307
To start off, 2008 Peugeot 307 is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1996 Fiat Coupe would be higher. At 1,997 cc (4 cylinders), 2008 Peugeot 307 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 307 weights approximately 178 kg more than 1996 Fiat Coupe.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Fiat Coupe (302 Nm @ 3400 RPM) has 102 more torque (in Nm) than 2008 Peugeot 307. (200 Nm @ 4000 RPM). This means 1996 Fiat Coupe will have an easier job in driving up hills or pulling heavy equipment than 2008 Peugeot 307.
Compare all specifications:
1996 Fiat Coupe | 2008 Peugeot 307 | |
Make | Fiat | Peugeot |
Model | Coupe | 307 |
Year Released | 1996 | 2008 |
Engine Position | Front | Front |
Engine Size | 1995 cc | 1997 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 193 HP | 0 HP |
Torque | 302 Nm | 200 Nm |
Torque RPM | 3400 RPM | 4000 RPM |
Engine Compression Ratio | 10.0:1 | 10.8:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 212 km/hour | 202 km/hour |
Acceleration 0-100mph | 8.9 seconds | 10.7 seconds |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1290 kg | 1468 kg |
Vehicle Length | 4260 mm | 4210 mm |
Vehicle Width | 1770 mm | 1740 mm |
Vehicle Height | 1350 mm | 1520 mm |
Wheelbase Size | 2550 mm | 2610 mm |
Fuel Tank Capacity | 63 L | 50 L |