1996 Fiat Panda vs. 2011 Ford Crown Victoria
To start off, 2011 Ford Crown Victoria is newer by 15 year(s). Which means there will be less support and parts availability for 1996 Fiat Panda. In addition, the cost of maintenance, including insurance, on 1996 Fiat Panda would be higher. At 4,604 cc (8 cylinders), 2011 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2011 Ford Crown Victoria (239 HP) has 206 more horse power than 1996 Fiat Panda. (33 HP) In normal driving conditions, 2011 Ford Crown Victoria should accelerate faster than 1996 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2011 Ford Crown Victoria weights approximately 2172 kg more than 1996 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2011 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2011 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1996 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Ford Crown Victoria (374 Nm @ 4000 RPM) has 316 more torque (in Nm) than 1996 Fiat Panda. (58 Nm @ 3000 RPM). This means 2011 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1996 Fiat Panda. 2011 Ford Crown Victoria has automatic transmission and 1996 Fiat Panda has manual transmission. 1996 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Fiat Panda | 2011 Ford Crown Victoria | |
Make | Fiat | Ford |
Model | Panda | Crown Victoria |
Year Released | 1996 | 2011 |
Body Type | Hatchback | Sedan |
Engine Position | Front | Front |
Engine Size | 769 cc | 4604 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 33 HP | 239 HP |
Torque | 58 Nm | 374 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Engine Bore Size | 65 mm | 90.2 mm |
Engine Stroke Size | 58 mm | 90 mm |
Engine Compression Ratio | 9.2:1 | 9.4:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 4 doors |
Vehicle Weight | 684 kg | 2856 kg |
Vehicle Length | 3420 mm | 5390 mm |
Vehicle Width | 1500 mm | 1970 mm |
Vehicle Height | 1440 mm | 1450 mm |
Wheelbase Size | 2170 mm | 2920 mm |
Fuel Tank Capacity | 50 L | 72 L |