1996 Ford Contour vs. 1954 Saab 94
To start off, 1996 Ford Contour is newer by 42 year(s). Which means there will be less support and parts availability for 1954 Saab 94. In addition, the cost of maintenance, including insurance, on 1954 Saab 94 would be higher. At 1,989 cc (4 cylinders), 1996 Ford Contour is equipped with a bigger engine. In terms of performance, 1996 Ford Contour (129 HP @ 6000 RPM) has 72 more horse power than 1954 Saab 94. (57 HP @ 5000 RPM). In normal driving conditions, 1996 Ford Contour should accelerate faster than 1954 Saab 94. With that said, vehicle weight also plays an important factor in acceleration. 1996 Ford Contour weights approximately 738 kg more than 1954 Saab 94. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Ford Contour (180 Nm @ 4000 RPM) has 95 more torque (in Nm) than 1954 Saab 94. (85 Nm @ 4000 RPM). This means 1996 Ford Contour will have an easier job in driving up hills or pulling heavy equipment than 1954 Saab 94.
Compare all specifications:
1996 Ford Contour | 1954 Saab 94 | |
Make | Ford | Saab |
Model | Contour | 94 |
Year Released | 1996 | 1954 |
Engine Position | Front | Front |
Engine Size | 1989 cc | 747 cc |
Engine Cylinders | 4 cylinders | 3 cylinders |
Engine Type | in-line | in-line |
Horse Power | 129 HP | 57 HP |
Engine RPM | 6000 RPM | 5000 RPM |
Torque | 180 Nm | 85 Nm |
Torque RPM | 4000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Number of Seats | 5 seats | 2 seats |
Vehicle Weight | 1242 kg | 504 kg |
Vehicle Length | 4680 mm | 3490 mm |
Vehicle Width | 1760 mm | 1430 mm |
Vehicle Height | 1400 mm | 1040 mm |
Wheelbase Size | 2710 mm | 2210 mm |