1996 Ford Mustang vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Ford Mustang. In addition, the cost of maintenance, including insurance, on 1996 Ford Mustang would be higher. At 3,797 cc (6 cylinders), 1996 Ford Mustang is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (168 HP @ 6000 RPM) has 25 more horse power than 1996 Ford Mustang. (143 HP @ 4000 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1996 Ford Mustang. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 520 kg more than 1996 Ford Mustang. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Ford Mustang is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Ford Mustang. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Ford Mustang (298 Nm @ 2750 RPM) has 78 more torque (in Nm) than 2010 Chrysler Sebring. (220 Nm @ 4400 RPM). This means 1996 Ford Mustang will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 1996 Ford Mustang has manual transmission. 1996 Ford Mustang will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Ford Mustang | 2010 Chrysler Sebring | |
Make | Ford | Chrysler |
Model | Mustang | Sebring |
Year Released | 1996 | 2010 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 3797 cc | 2360 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 143 HP | 168 HP |
Engine RPM | 4000 RPM | 6000 RPM |
Torque | 298 Nm | 220 Nm |
Torque RPM | 2750 RPM | 4400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1390 kg | 1910 kg |
Vehicle Length | 4660 mm | 4860 mm |
Vehicle Width | 1860 mm | 1850 mm |
Vehicle Height | 1360 mm | 1500 mm |
Wheelbase Size | 2580 mm | 2770 mm |