1996 Ford Scorpio vs. 2010 Dodge Journey

To start off, 2010 Dodge Journey is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Ford Scorpio. In addition, the cost of maintenance, including insurance, on 1996 Ford Scorpio would be higher. At 3,500 cc (6 cylinders), 2010 Dodge Journey is equipped with a bigger engine. In terms of performance, 2010 Dodge Journey (235 HP @ 6400 RPM) has 90 more horse power than 1996 Ford Scorpio. (145 HP @ 5600 RPM) In normal driving conditions, 2010 Dodge Journey should accelerate faster than 1996 Ford Scorpio. With that said, vehicle weight also plays an important factor in acceleration. 2010 Dodge Journey weights approximately 375 kg more than 1996 Ford Scorpio. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 Ford Scorpio is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Ford Scorpio. However, in wet, icy, snow, or gravel driving conditions, 2010 Dodge Journey, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Dodge Journey (314 Nm @ 4000 RPM) has 112 more torque (in Nm) than 1996 Ford Scorpio. (202 Nm @ 4500 RPM). This means 2010 Dodge Journey will have an easier job in driving up hills or pulling heavy equipment than 1996 Ford Scorpio. 2010 Dodge Journey has automatic transmission and 1996 Ford Scorpio has manual transmission. 1996 Ford Scorpio will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Dodge Journey will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Ford Scorpio 2010 Dodge Journey
Make Ford Dodge
Model Scorpio Journey
Year Released 1996 2010
Engine Position Front Front
Engine Size 2295 cc 3500 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 145 HP 235 HP
Engine RPM 5600 RPM 6400 RPM
Torque 202 Nm 314 Nm
Torque RPM 4500 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 7 seats
Vehicle Weight 1440 kg 1815 kg
Vehicle Length 4830 mm 4887 mm
Vehicle Width 1880 mm 1834 mm
Vehicle Height 1450 mm 1765 mm