1996 Holden Statesman vs. 2010 Fiat Panda

To start off, 2010 Fiat Panda is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1996 Holden Statesman would be higher. At 3,789 cc (6 cylinders), 1996 Holden Statesman is equipped with a bigger engine. In terms of performance, 1996 Holden Statesman (197 HP @ 5200 RPM) has 138 more horse power than 2010 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 1996 Holden Statesman should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1996 Holden Statesman weights approximately 660 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Holden Statesman (304 Nm @ 3600 RPM) has 202 more torque (in Nm) than 2010 Fiat Panda. (102 Nm @ 2500 RPM). This means 1996 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 1996 Holden Statesman has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Holden Statesman will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Holden Statesman 2010 Fiat Panda
Make Holden Fiat
Model Statesman Panda
Year Released 1996 2010
Engine Position Front Front
Engine Size 3789 cc 1242 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 197 HP 59 HP
Engine RPM 5200 RPM 5000 RPM
Torque 304 Nm 102 Nm
Torque RPM 3600 RPM 2500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Vehicle Weight 1520 kg 860 kg
Vehicle Length 5000 mm 3540 mm
Vehicle Width 1800 mm 1580 mm
Vehicle Height 1470 mm 1550 mm
Wheelbase Size 2830 mm 2310 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]