1996 Kia Avella vs. 2005 MG ZT
To start off, 2005 MG ZT is newer by 9 year(s). Which means there will be less support and parts availability for 1996 Kia Avella. In addition, the cost of maintenance, including insurance, on 1996 Kia Avella would be higher. At 1,795 cc (4 cylinders), 2005 MG ZT is equipped with a bigger engine. In terms of performance, 2005 MG ZT (158 HP @ 5500 RPM) has 71 more horse power than 1996 Kia Avella. (87 HP @ 5000 RPM) In normal driving conditions, 2005 MG ZT should accelerate faster than 1996 Kia Avella. With that said, vehicle weight also plays an important factor in acceleration. 2005 MG ZT weights approximately 540 kg more than 1996 Kia Avella. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 MG ZT (215 Nm @ 2100 RPM) has 80 more torque (in Nm) than 1996 Kia Avella. (135 Nm @ 4000 RPM). This means 2005 MG ZT will have an easier job in driving up hills or pulling heavy equipment than 1996 Kia Avella.
Compare all specifications:
1996 Kia Avella | 2005 MG ZT | |
Make | Kia | MG |
Model | Avella | ZT |
Year Released | 1996 | 2005 |
Engine Position | Front | Front |
Engine Size | 1498 cc | 1795 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 158 HP |
Engine RPM | 5000 RPM | 5500 RPM |
Torque | 135 Nm | 215 Nm |
Torque RPM | 4000 RPM | 2100 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Doors | 3 doors | 4 doors |
Vehicle Weight | 945 kg | 1485 kg |
Vehicle Length | 3980 mm | 4760 mm |
Vehicle Width | 1670 mm | 1790 mm |
Vehicle Height | 1460 mm | 1440 mm |
Wheelbase Size | 2400 mm | 2760 mm |