1996 Lancia Kappa vs. 1957 Mercedes-Benz 220

To start off, 1996 Lancia Kappa is newer by 39 year(s). Which means there will be less support and parts availability for 1957 Mercedes-Benz 220. In addition, the cost of maintenance, including insurance, on 1957 Mercedes-Benz 220 would be higher. At 2,193 cc (6 cylinders), 1957 Mercedes-Benz 220 is equipped with a bigger engine. In terms of performance, 1996 Lancia Kappa (156 HP @ 6500 RPM) has 52 more horse power than 1957 Mercedes-Benz 220. (104 HP @ 5200 RPM). In normal driving conditions, 1996 Lancia Kappa should accelerate faster than 1957 Mercedes-Benz 220. With that said, vehicle weight also plays an important factor in acceleration. 1996 Lancia Kappa weights approximately 172 kg more than 1957 Mercedes-Benz 220. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1957 Mercedes-Benz 220 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Mercedes-Benz 220. However, in wet, icy, snow, or gravel driving conditions, 1996 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Lancia Kappa (186 Nm @ 4000 RPM) has 14 more torque (in Nm) than 1957 Mercedes-Benz 220. (172 Nm @ 3500 RPM). This means 1996 Lancia Kappa will have an easier job in driving up hills or pulling heavy equipment than 1957 Mercedes-Benz 220.

Compare all specifications:

1996 Lancia Kappa 1957 Mercedes-Benz 220
Make Lancia Mercedes-Benz
Model Kappa 220
Year Released 1996 1957
Engine Position Front Front
Engine Size 1998 cc 2193 cc
Engine Cylinders 5 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 156 HP 104 HP
Engine RPM 6500 RPM 5200 RPM
Torque 186 Nm 172 Nm
Torque RPM 4000 RPM 3500 RPM
Engine Bore Size 82 mm 80 mm
Engine Stroke Size 75.7 mm 72.8 mm
Engine Compression Ratio 10.4:1 8.7:1
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1510 kg 1338 kg
Vehicle Length 4700 mm 4710 mm
Vehicle Width 1840 mm 1800 mm
Vehicle Height 1470 mm 1540 mm
Wheelbase Size 2710 mm 2710 mm
Fuel Tank Capacity 70 L 64 L