1996 Lancia Kappa vs. 2006 Mercedes-Benz C

To start off, 2006 Mercedes-Benz C is newer by 10 year(s). Which means there will be less support and parts availability for 1996 Lancia Kappa. In addition, the cost of maintenance, including insurance, on 1996 Lancia Kappa would be higher. At 2,996 cc (6 cylinders), 2006 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 2006 Mercedes-Benz C (228 HP @ 6000 RPM) has 72 more horse power than 1996 Lancia Kappa. (156 HP @ 6500 RPM) In normal driving conditions, 2006 Mercedes-Benz C should accelerate faster than 1996 Lancia Kappa. With that said, vehicle weight also plays an important factor in acceleration. 2006 Mercedes-Benz C weights approximately 90 kg more than 1996 Lancia Kappa. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2006 Mercedes-Benz C is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Mercedes-Benz C. However, in wet, icy, snow, or gravel driving conditions, 1996 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mercedes-Benz C (300 Nm @ 2500 RPM) has 114 more torque (in Nm) than 1996 Lancia Kappa. (186 Nm @ 4000 RPM). This means 2006 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 1996 Lancia Kappa. 2006 Mercedes-Benz C has automatic transmission and 1996 Lancia Kappa has manual transmission. 1996 Lancia Kappa will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Mercedes-Benz C will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Lancia Kappa 2006 Mercedes-Benz C
Make Lancia Mercedes-Benz
Model Kappa C
Year Released 1996 2006
Body Type Station Wagon Sedan
Engine Position Front Front
Engine Size 1998 cc 2996 cc
Engine Cylinders 5 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 156 HP 228 HP
Engine RPM 6500 RPM 6000 RPM
Torque 186 Nm 300 Nm
Torque RPM 4000 RPM 2500 RPM
Engine Bore Size 82 mm 88 mm
Engine Stroke Size 75.7 mm 82.1 mm
Engine Compression Ratio 10.4:1 11.1:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1510 kg 1600 kg
Vehicle Length 4700 mm 4640 mm
Vehicle Width 1840 mm 1750 mm
Vehicle Height 1470 mm 1420 mm
Wheelbase Size 2710 mm 2720 mm
Fuel Tank Capacity 70 L 70 L