1996 Lancia Ypsilon vs. 1990 Mercedes-Benz 260
To start off, 1996 Lancia Ypsilon is newer by 6 year(s). Which means there will be less support and parts availability for 1990 Mercedes-Benz 260. In addition, the cost of maintenance, including insurance, on 1990 Mercedes-Benz 260 would be higher. At 2,599 cc (6 cylinders), 1990 Mercedes-Benz 260 is equipped with a bigger engine. In terms of performance, 1990 Mercedes-Benz 260 (168 HP @ 5800 RPM) has 89 more horse power than 1996 Lancia Ypsilon. (79 HP @ 6000 RPM) In normal driving conditions, 1990 Mercedes-Benz 260 should accelerate faster than 1996 Lancia Ypsilon. With that said, vehicle weight also plays an important factor in acceleration. 1990 Mercedes-Benz 260 weights approximately 604 kg more than 1996 Lancia Ypsilon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1990 Mercedes-Benz 260 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Mercedes-Benz 260. However, in wet, icy, snow, or gravel driving conditions, 1996 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Mercedes-Benz 260 (228 Nm @ 4600 RPM) has 116 more torque (in Nm) than 1996 Lancia Ypsilon. (112 Nm @ 3250 RPM). This means 1990 Mercedes-Benz 260 will have an easier job in driving up hills or pulling heavy equipment than 1996 Lancia Ypsilon. 1990 Mercedes-Benz 260 has automatic transmission and 1996 Lancia Ypsilon has manual transmission. 1996 Lancia Ypsilon will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Mercedes-Benz 260 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1996 Lancia Ypsilon | 1990 Mercedes-Benz 260 | |
| Make | Lancia | Mercedes-Benz |
| Model | Ypsilon | 260 |
| Year Released | 1996 | 1990 |
| Engine Position | Front | Front |
| Engine Size | 1370 cc | 2599 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 79 HP | 168 HP |
| Engine RPM | 6000 RPM | 5800 RPM |
| Torque | 112 Nm | 228 Nm |
| Torque RPM | 3250 RPM | 4600 RPM |
| Engine Bore Size | 80 mm | 82.9 mm |
| Engine Stroke Size | 71.5 mm | 80.3 mm |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 3 doors | 4 doors |
| Vehicle Weight | 920 kg | 1524 kg |
| Vehicle Length | 3730 mm | 5030 mm |
| Vehicle Width | 1700 mm | 1830 mm |
| Vehicle Height | 1440 mm | 1440 mm |
| Wheelbase Size | 2390 mm | 2940 mm |
