1996 Mercedes-Benz C vs. 2012 Ford Bantam
To start off, 2012 Ford Bantam is newer by 16 year(s). Which means there will be less support and parts availability for 1996 Mercedes-Benz C. In addition, the cost of maintenance, including insurance, on 1996 Mercedes-Benz C would be higher. At 2,799 cc (6 cylinders), 1996 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz C (190 HP @ 5500 RPM) has 96 more horse power than 2012 Ford Bantam. (94 HP @ 5500 RPM). In normal driving conditions, 1996 Mercedes-Benz C should accelerate faster than 2012 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz C weights approximately 1066 kg more than 2012 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Mercedes-Benz C is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Mercedes-Benz C. However, in wet, icy, snow, or gravel driving conditions, 2012 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz C (270 Nm @ 3750 RPM) has 135 more torque (in Nm) than 2012 Ford Bantam. (135 Nm @ 2500 RPM). This means 1996 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 2012 Ford Bantam. 1996 Mercedes-Benz C has automatic transmission and 2012 Ford Bantam has manual transmission. 2012 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Mercedes-Benz C will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1996 Mercedes-Benz C | 2012 Ford Bantam | |
| Make | Mercedes-Benz | Ford |
| Model | C | Bantam |
| Year Released | 1996 | 2012 |
| Body Type | Sedan | Pickup |
| Engine Position | Front | Front |
| Engine Size | 2799 cc | 1597 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 190 HP | 94 HP |
| Engine RPM | 5500 RPM | 5500 RPM |
| Torque | 270 Nm | 135 Nm |
| Torque RPM | 3750 RPM | 2500 RPM |
| Engine Compression Ratio | 10.0:1 | 9.5:1 |
| Top Speed | 222 km/hour | 176 km/hour |
| Acceleration 0-100mph | 8.5 seconds | 11.2 seconds |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 2 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 2050 kg | 984 kg |
| Vehicle Length | 4490 mm | 4280 mm |
| Vehicle Width | 1730 mm | 1470 mm |
| Vehicle Height | 1430 mm | 1640 mm |
| Wheelbase Size | 2700 mm | 2670 mm |
| Fuel Consumption Overall | 8.6 L/100km | 9.4 L/100km |
| Fuel Tank Capacity | 62 L | 54 L |
