1996 Mercedes-Benz E vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Mercedes-Benz E. In addition, the cost of maintenance, including insurance, on 1996 Mercedes-Benz E would be higher. At 4,973 cc (8 cylinders), 1996 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz E (343 HP @ 5750 RPM) has 269 more horse power than 2010 Fiat Panda. (74 HP @ 4000 RPM). In normal driving conditions, 1996 Mercedes-Benz E should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz E weights approximately 666 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz E (480 Nm @ 3750 RPM) has 335 more torque (in Nm) than 2010 Fiat Panda. (145 Nm @ 1500 RPM). This means 1996 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 1996 Mercedes-Benz E has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Mercedes-Benz E | 2010 Fiat Panda | |
Make | Mercedes-Benz | Fiat |
Model | E | Panda |
Year Released | 1996 | 2010 |
Body Type | Sedan | Hatchback |
Engine Position | Front | Front |
Engine Size | 4973 cc | 1248 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 343 HP | 74 HP |
Engine RPM | 5750 RPM | 4000 RPM |
Torque | 480 Nm | 145 Nm |
Torque RPM | 3750 RPM | 1500 RPM |
Engine Bore Size | 96.5 mm | 69.6 mm |
Engine Stroke Size | 85 mm | 82 mm |
Engine Compression Ratio | 11.0:1 | 18.0:1 |
Top Speed | 249 km/hour | 165 km/hour |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1676 kg | 1010 kg |
Vehicle Length | 4800 mm | 3540 mm |
Vehicle Width | 1810 mm | 1600 mm |
Vehicle Height | 1420 mm | 1580 mm |
Wheelbase Size | 2840 mm | 2310 mm |
Fuel Consumption Overall | 9.9 L/100km | 4.3 L/100km |
Fuel Tank Capacity | 80 L | 35 L |