1996 Mercedes-Benz S vs. 2010 Mercury Milan
To start off, 2010 Mercury Milan is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Mercedes-Benz S. In addition, the cost of maintenance, including insurance, on 1996 Mercedes-Benz S would be higher. At 5,985 cc (12 cylinders), 1996 Mercedes-Benz S is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz S (389 HP @ 5200 RPM) has 214 more horse power than 2010 Mercury Milan. (175 HP @ 6000 RPM). In normal driving conditions, 1996 Mercedes-Benz S should accelerate faster than 2010 Mercury Milan. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz S weights approximately 680 kg more than 2010 Mercury Milan. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Mercedes-Benz S is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Mercedes-Benz S. However, in wet, icy, snow, or gravel driving conditions, 2010 Mercury Milan, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz S (570 Nm @ 3800 RPM) has 337 more torque (in Nm) than 2010 Mercury Milan. (233 Nm @ 4500 RPM). This means 1996 Mercedes-Benz S will have an easier job in driving up hills or pulling heavy equipment than 2010 Mercury Milan. 1996 Mercedes-Benz S has automatic transmission and 2010 Mercury Milan has manual transmission. 2010 Mercury Milan will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Mercedes-Benz S will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Mercedes-Benz S | 2010 Mercury Milan | |
Make | Mercedes-Benz | Mercury |
Model | S | Milan |
Year Released | 1996 | 2010 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 5985 cc | 2500 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 389 HP | 175 HP |
Engine RPM | 5200 RPM | 6000 RPM |
Torque | 570 Nm | 233 Nm |
Torque RPM | 3800 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 2180 kg | 1500 kg |
Vehicle Length | 5120 mm | 4801 mm |
Vehicle Width | 1890 mm | 1834 mm |
Vehicle Height | 1490 mm | 1445 mm |
Wheelbase Size | 2520 mm | 2728 mm |
Fuel Tank Capacity | 100 L | 66 L |