1996 Mitsubishi Lancer vs. 2010 Chevrolet Suburban
To start off, 2010 Chevrolet Suburban is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Mitsubishi Lancer. In addition, the cost of maintenance, including insurance, on 1996 Mitsubishi Lancer would be higher. At 5,300 cc (8 cylinders), 2010 Chevrolet Suburban is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Suburban (320 HP @ 5400 RPM) has 209 more horse power than 1996 Mitsubishi Lancer. (111 HP @ 6000 RPM) In normal driving conditions, 2010 Chevrolet Suburban should accelerate faster than 1996 Mitsubishi Lancer. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Suburban weights approximately 1508 kg more than 1996 Mitsubishi Lancer. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Chevrolet Suburban is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Chevrolet Suburban. However, in wet, icy, snow, or gravel driving conditions, 1996 Mitsubishi Lancer, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Suburban (454 Nm @ 4000 RPM) has 317 more torque (in Nm) than 1996 Mitsubishi Lancer. (137 Nm @ 5000 RPM). This means 2010 Chevrolet Suburban will have an easier job in driving up hills or pulling heavy equipment than 1996 Mitsubishi Lancer. 2010 Chevrolet Suburban has automatic transmission and 1996 Mitsubishi Lancer has manual transmission. 1996 Mitsubishi Lancer will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Suburban will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1996 Mitsubishi Lancer | 2010 Chevrolet Suburban | |
| Make | Mitsubishi | Chevrolet |
| Model | Lancer | Suburban |
| Year Released | 1996 | 2010 |
| Body Type | Station Wagon | SUV |
| Engine Position | Front | Front |
| Engine Size | 1597 cc | 5300 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 111 HP | 320 HP |
| Engine RPM | 6000 RPM | 5400 RPM |
| Torque | 137 Nm | 454 Nm |
| Torque RPM | 5000 RPM | 4000 RPM |
| Fuel Type | Gasoline | Flex Fuel |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 7 seats |
| Vehicle Weight | 1035 kg | 2543 kg |
| Vehicle Length | 4280 mm | 5649 mm |
| Vehicle Width | 1700 mm | 2009 mm |
| Vehicle Height | 1480 mm | 1951 mm |
