1996 Renault Fifties vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 14 year(s). Which means there will be less support and parts availability for 1996 Renault Fifties. In addition, the cost of maintenance, including insurance, on 1996 Renault Fifties would be higher. At 2,736 cc (6 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (187 HP @ 5500 RPM) has 128 more horse power than 1996 Renault Fifties. (59 HP @ 5250 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1996 Renault Fifties. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 1120 kg more than 1996 Renault Fifties. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Renault Fifties is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Renault Fifties. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (259 Nm @ 4000 RPM) has 166 more torque (in Nm) than 1996 Renault Fifties. (93 Nm @ 2500 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1996 Renault Fifties. 2010 Chrysler Sebring has automatic transmission and 1996 Renault Fifties has manual transmission. 1996 Renault Fifties will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Renault Fifties | 2010 Chrysler Sebring | |
Make | Renault | Chrysler |
Model | Fifties | Sebring |
Year Released | 1996 | 2010 |
Engine Position | Rear | Front |
Engine Size | 1149 cc | 2736 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 59 HP | 187 HP |
Engine RPM | 5250 RPM | 5500 RPM |
Torque | 93 Nm | 259 Nm |
Torque RPM | 2500 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 790 kg | 1910 kg |
Vehicle Length | 3610 mm | 4930 mm |
Vehicle Width | 1710 mm | 1820 mm |
Vehicle Height | 1380 mm | 1490 mm |
Wheelbase Size | 2590 mm | 2770 mm |
Fuel Tank Capacity | 60 L | 64 L |