1996 Vauxhall Carlton vs. 2013 Cadillac ATS

To start off, 2013 Cadillac ATS is newer by 17 year(s). Which means there will be less support and parts availability for 1996 Vauxhall Carlton. In addition, the cost of maintenance, including insurance, on 1996 Vauxhall Carlton would be higher. At 3,638 cc (6 cylinders), 1996 Vauxhall Carlton is equipped with a bigger engine. In terms of performance, 1996 Vauxhall Carlton (355 HP @ 5800 RPM) has 38 more horse power than 2013 Cadillac ATS. (317 HP @ 6800 RPM). In normal driving conditions, 1996 Vauxhall Carlton should accelerate faster than 2013 Cadillac ATS. With that said, vehicle weight also plays an important factor in acceleration. 1996 Vauxhall Carlton weights approximately 30 kg more than 2013 Cadillac ATS. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 Cadillac ATS is all wheel drive (AWD), it will have significant more traction and grip than 1996 Vauxhall Carlton. In wet, icy, snow, or gravel driving conditions, 2013 Cadillac ATS will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Vauxhall Carlton (531 Nm @ 3300 RPM) has 158 more torque (in Nm) than 2013 Cadillac ATS. (373 Nm @ 5500 RPM). This means 1996 Vauxhall Carlton will have an easier job in driving up hills or pulling heavy equipment than 2013 Cadillac ATS. 2013 Cadillac ATS has automatic transmission and 1996 Vauxhall Carlton has manual transmission. 1996 Vauxhall Carlton will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac ATS will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Vauxhall Carlton 2013 Cadillac ATS
Make Vauxhall Cadillac
Model Carlton ATS
Year Released 1996 2013
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 3638 cc 3600 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 355 HP 317 HP
Engine RPM 5800 RPM 6800 RPM
Torque 531 Nm 373 Nm
Torque RPM 3300 RPM 5500 RPM
Fuel Type Gasoline Flex Fuel
Drive Type Rear AWD
Transmission Type Manual 6-speed automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1600 kg 1570 kg
Vehicle Length 4690 mm 4643 mm
Vehicle Width 1780 mm 1806 mm
Vehicle Height 1450 mm 1420 mm
Wheelbase Size 2740 mm 2776 mm