1997 Alfa Romeo 155 vs. 1988 Volvo 440

To start off, 1997 Alfa Romeo 155 is newer by 9 year(s). Which means there will be less support and parts availability for 1988 Volvo 440. In addition, the cost of maintenance, including insurance, on 1988 Volvo 440 would be higher. At 1,721 cc (4 cylinders), 1988 Volvo 440 is equipped with a bigger engine. In terms of performance, 1997 Alfa Romeo 155 (118 HP @ 6300 RPM) has 9 more horse power than 1988 Volvo 440. (109 HP @ 5800 RPM). In normal driving conditions, 1997 Alfa Romeo 155 should accelerate faster than 1988 Volvo 440. With that said, vehicle weight also plays an important factor in acceleration. 1997 Alfa Romeo 155 weights approximately 250 kg more than 1988 Volvo 440. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Alfa Romeo 155 (144 Nm @ 4500 RPM) has 1 more torque (in Nm) than 1988 Volvo 440. (143 Nm @ 4000 RPM). This means 1997 Alfa Romeo 155 will have an easier job in driving up hills or pulling heavy equipment than 1988 Volvo 440.

Compare all specifications:

1997 Alfa Romeo 155 1988 Volvo 440
Make Alfa Romeo Volvo
Model 155 440
Year Released 1997 1988
Engine Position Front Front
Engine Size 1598 cc 1721 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 118 HP 109 HP
Engine RPM 6300 RPM 5800 RPM
Torque 144 Nm 143 Nm
Torque RPM 4500 RPM 4000 RPM
Engine Bore Size 82 mm 81 mm
Engine Stroke Size 75.7 mm 83.5 mm
Engine Compression Ratio 10.3:1 10.5:1
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1270 kg 1020 kg
Vehicle Length 4450 mm 4320 mm
Vehicle Width 1710 mm 1720 mm
Vehicle Height 1450 mm 1410 mm