1997 Aston Martin DB7 vs. 2010 Ford Fusion
To start off, 2010 Ford Fusion is newer by 13 year(s). Which means there will be less support and parts availability for 1997 Aston Martin DB7. In addition, the cost of maintenance, including insurance, on 1997 Aston Martin DB7 would be higher. At 3,500 cc (6 cylinders), 2010 Ford Fusion is equipped with a bigger engine. In terms of performance, 1997 Aston Martin DB7 (331 HP @ 5750 RPM) has 68 more horse power than 2010 Ford Fusion. (263 HP @ 6250 RPM). In normal driving conditions, 1997 Aston Martin DB7 should accelerate faster than 2010 Ford Fusion. With that said, vehicle weight also plays an important factor in acceleration. 1997 Aston Martin DB7 weights approximately 246 kg more than 2010 Ford Fusion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1997 Aston Martin DB7 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1997 Aston Martin DB7. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Aston Martin DB7 (490 Nm @ 3000 RPM) has 153 more torque (in Nm) than 2010 Ford Fusion. (337 Nm @ 4500 RPM). This means 1997 Aston Martin DB7 will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Fusion. 2010 Ford Fusion has automatic transmission and 1997 Aston Martin DB7 has manual transmission. 1997 Aston Martin DB7 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Ford Fusion will be easier to drive especially in heavy traffic.
Compare all specifications:
1997 Aston Martin DB7 | 2010 Ford Fusion | |
Make | Aston Martin | Ford |
Model | DB7 | Fusion |
Year Released | 1997 | 2010 |
Body Type | Convertible | Sedan |
Engine Position | Front | Front |
Engine Size | 3236 cc | 3500 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 331 HP | 263 HP |
Engine RPM | 5750 RPM | 6250 RPM |
Torque | 490 Nm | 337 Nm |
Torque RPM | 3000 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1875 kg | 1629 kg |
Vehicle Length | 4720 mm | 4841 mm |
Vehicle Width | 1830 mm | 1834 mm |
Vehicle Height | 1270 mm | 1445 mm |
Wheelbase Size | 2600 mm | 2728 mm |
Fuel Tank Capacity | 85 L | 66 L |