1997 Beijing BJ 2020 vs. 1984 Ford GT
To start off, 1997 Beijing BJ 2020 is newer by 13 year(s). Which means there will be less support and parts availability for 1984 Ford GT. In addition, the cost of maintenance, including insurance, on 1984 Ford GT would be higher. At 2,445 cc (4 cylinders), 1997 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 1984 Ford GT (130 HP @ 5500 RPM) has 47 more horse power than 1997 Beijing BJ 2020. (83 HP @ 3800 RPM) In normal driving conditions, 1984 Ford GT should accelerate faster than 1997 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 1997 Beijing BJ 2020 weights approximately 424 kg more than 1984 Ford GT.
Because 1997 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1984 Ford GT. In wet, icy, snow, or gravel driving conditions, 1997 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1984 Ford GT (203 Nm @ 3500 RPM) has 30 more torque (in Nm) than 1997 Beijing BJ 2020. (173 Nm @ 2200 RPM). This means 1984 Ford GT will have an easier job in driving up hills or pulling heavy equipment than 1997 Beijing BJ 2020.
Compare all specifications:
1997 Beijing BJ 2020 | 1984 Ford GT | |
Make | Beijing | Ford |
Model | BJ 2020 | GT |
Year Released | 1997 | 1984 |
Engine Size | 2445 cc | 2299 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 83 HP | 130 HP |
Engine RPM | 3800 RPM | 5500 RPM |
Torque | 173 Nm | 203 Nm |
Torque RPM | 2200 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1554 kg | 1130 kg |
Vehicle Length | 3870 mm | 4360 mm |
Vehicle Width | 1760 mm | 1710 mm |
Vehicle Height | 1880 mm | 1330 mm |
Wheelbase Size | 2310 mm | 2590 mm |