1997 Beijing BJ 2020 vs. 2010 Mazda RX-8
To start off, 2010 Mazda RX-8 is newer by 13 year(s). Which means there will be less support and parts availability for 1997 Beijing BJ 2020. In addition, the cost of maintenance, including insurance, on 1997 Beijing BJ 2020 would be higher. At 2,445 cc (4 cylinders), 1997 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 2010 Mazda RX-8 (232 HP @ 8500 RPM) has 149 more horse power than 1997 Beijing BJ 2020. (83 HP @ 3800 RPM) In normal driving conditions, 2010 Mazda RX-8 should accelerate faster than 1997 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 1997 Beijing BJ 2020 weights approximately 164 kg more than 2010 Mazda RX-8.
Because 1997 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 2010 Mazda RX-8. In wet, icy, snow, or gravel driving conditions, 1997 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda RX-8 (215 Nm @ 5500 RPM) has 42 more torque (in Nm) than 1997 Beijing BJ 2020. (173 Nm @ 2200 RPM). This means 2010 Mazda RX-8 will have an easier job in driving up hills or pulling heavy equipment than 1997 Beijing BJ 2020.
Compare all specifications:
1997 Beijing BJ 2020 | 2010 Mazda RX-8 | |
Make | Beijing | Mazda |
Model | BJ 2020 | RX-8 |
Year Released | 1997 | 2010 |
Engine Size | 2445 cc | 1300 cc |
Engine Type | in-line | dual-disk rotary |
Horse Power | 83 HP | 232 HP |
Engine RPM | 3800 RPM | 8500 RPM |
Torque | 173 Nm | 215 Nm |
Torque RPM | 2200 RPM | 5500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1554 kg | 1390 kg |
Vehicle Length | 3870 mm | 4460 mm |
Vehicle Width | 1760 mm | 1770 mm |
Vehicle Height | 1880 mm | 1341 mm |
Wheelbase Size | 2310 mm | 2700 mm |