1997 BMW M3 vs. 2010 Tata Nano

To start off, 2010 Tata Nano is newer by 13 year(s). Which means there will be less support and parts availability for 1997 BMW M3. In addition, the cost of maintenance, including insurance, on 1997 BMW M3 would be higher. At 3,201 cc (6 cylinders), 1997 BMW M3 is equipped with a bigger engine. In terms of performance, 1997 BMW M3 (240 HP @ 4800 RPM) has 205 more horse power than 2010 Tata Nano. (35 HP @ 5250 RPM). In normal driving conditions, 1997 BMW M3 should accelerate faster than 2010 Tata Nano. With that said, vehicle weight also plays an important factor in acceleration. 1997 BMW M3 weights approximately 700 kg more than 2010 Tata Nano. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 BMW M3 (236 Nm) has 188 more torque (in Nm) than 2010 Tata Nano. (48 Nm). This means 1997 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 2010 Tata Nano.

Compare all specifications:

1997 BMW M3 2010 Tata Nano
Make BMW Tata
Model M3 Nano
Year Released 1997 2010
Engine Position Front Rear
Engine Size 3201 cc 624 cc
Engine Cylinders 6 cylinders 2 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 240 HP 35 HP
Engine RPM 4800 RPM 5250 RPM
Torque 236 Nm 48 Nm
Engine Compression Ratio 10.2:1 9.5:1
Top Speed 220 km/hour 105 km/hour
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 4 seats
Vehicle Weight 1300 kg 600 kg
Vehicle Length 4440 mm 3099 mm
Vehicle Width 1720 mm 1495 mm
Vehicle Height 1370 mm 1652 mm
Wheelbase Size 2710 mm 2230 mm