1997 Chevrolet Camaro vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 13 year(s). Which means there will be less support and parts availability for 1997 Chevrolet Camaro. In addition, the cost of maintenance, including insurance, on 1997 Chevrolet Camaro would be higher. At 3,518 cc (6 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (235 HP @ 6400 RPM) has 75 more horse power than 1997 Chevrolet Camaro. (160 HP @ 4600 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1997 Chevrolet Camaro. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 460 kg more than 1997 Chevrolet Camaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1997 Chevrolet Camaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1997 Chevrolet Camaro. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (315 Nm @ 4000 RPM) has 44 more torque (in Nm) than 1997 Chevrolet Camaro. (271 Nm @ 3600 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1997 Chevrolet Camaro. 2010 Chrysler Sebring has automatic transmission and 1997 Chevrolet Camaro has manual transmission. 1997 Chevrolet Camaro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1997 Chevrolet Camaro | 2010 Chrysler Sebring | |
Make | Chevrolet | Chrysler |
Model | Camaro | Sebring |
Year Released | 1997 | 2010 |
Body Type | Coupe | Convertible |
Engine Position | Front | Front |
Engine Size | 3391 cc | 3518 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 160 HP | 235 HP |
Engine RPM | 4600 RPM | 6400 RPM |
Torque | 271 Nm | 315 Nm |
Torque RPM | 3600 RPM | 4000 RPM |
Engine Compression Ratio | 9.0:1 | 9.9:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1413 kg | 1873 kg |
Vehicle Length | 4910 mm | 4930 mm |
Vehicle Width | 1890 mm | 1820 mm |
Vehicle Height | 1310 mm | 1490 mm |
Wheelbase Size | 2450 mm | 2770 mm |
Fuel Consumption Overall | 14 L/100km | 11.8 L/100km |
Fuel Tank Capacity | 68 L | 64 L |