1997 Chrysler Sebring vs. 2000 Toyota Mark II
To start off, 2000 Toyota Mark II is newer by 3 year(s). Which means there will be less support and parts availability for 1997 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1997 Chrysler Sebring would be higher. At 2,489 cc (6 cylinders), 2000 Toyota Mark II is equipped with a bigger engine. In terms of performance, 2000 Toyota Mark II (276 HP @ 6200 RPM) has 138 more horse power than 1997 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2000 Toyota Mark II should accelerate faster than 1997 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2000 Toyota Mark II weights approximately 310 kg more than 1997 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2000 Toyota Mark II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Toyota Mark II. However, in wet, icy, snow, or gravel driving conditions, 1997 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Toyota Mark II (378 Nm) has 202 more torque (in Nm) than 1997 Chrysler Sebring. (176 Nm). This means 2000 Toyota Mark II will have an easier job in driving up hills or pulling heavy equipment than 1997 Chrysler Sebring. 2000 Toyota Mark II has automatic transmission and 1997 Chrysler Sebring has manual transmission. 1997 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Toyota Mark II will be easier to drive especially in heavy traffic.
Compare all specifications:
1997 Chrysler Sebring | 2000 Toyota Mark II | |
Make | Chrysler | Toyota |
Model | Sebring | Mark II |
Year Released | 1997 | 2000 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 2489 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 138 HP | 276 HP |
Engine RPM | 6000 RPM | 6200 RPM |
Torque | 176 Nm | 378 Nm |
Engine Bore Size | 87.5 mm | 86 mm |
Engine Stroke Size | 83 mm | 71.5 mm |
Engine Compression Ratio | 9.6:1 | 9.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1310 kg | 1620 kg |
Vehicle Length | 4770 mm | 4780 mm |
Vehicle Width | 1780 mm | 1770 mm |