1997 Daihatsu Move vs. 1963 Fiat 500
To start off, 1997 Daihatsu Move is newer by 34 year(s). Which means there will be less support and parts availability for 1963 Fiat 500. In addition, the cost of maintenance, including insurance, on 1963 Fiat 500 would be higher. At 847 cc (4 cylinders), 1997 Daihatsu Move is equipped with a bigger engine. In terms of performance, 1997 Daihatsu Move (43 HP) has 21 more horse power than 1963 Fiat 500. (22 HP). In normal driving conditions, 1997 Daihatsu Move should accelerate faster than 1963 Fiat 500.
Because 1963 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 1997 Daihatsu Move, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Daihatsu Move (88 Nm) has 52 more torque (in Nm) than 1963 Fiat 500. (36 Nm). This means 1997 Daihatsu Move will have an easier job in driving up hills or pulling heavy equipment than 1963 Fiat 500.
Compare all specifications:
| 1997 Daihatsu Move | 1963 Fiat 500 | |
| Make | Daihatsu | Fiat |
| Model | Move | 500 |
| Year Released | 1997 | 1963 |
| Engine Position | Front | Rear |
| Engine Size | 847 cc | 499 cc |
| Engine Cylinders | 4 cylinders | 2 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 3 valves | 2 valves |
| Horse Power | 43 HP | 22 HP |
| Torque | 88 Nm | 36 Nm |
| Engine Compression Ratio | 10.0:1 | 9.5:1 |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 4 seats |
| Vehicle Length | 3420 mm | 3190 mm |
| Vehicle Width | 1480 mm | 1330 mm |
| Vehicle Height | 1700 mm | 1360 mm |
| Wheelbase Size | 2350 mm | 1950 mm |
