1997 Dodge Viper vs. 2009 Zenvo ST1
To start off, 2009 Zenvo ST1 is newer by 12 year(s). Which means there will be less support and parts availability for 1997 Dodge Viper. In addition, the cost of maintenance, including insurance, on 1997 Dodge Viper would be higher. At 7,986 cc (10 cylinders), 1997 Dodge Viper is equipped with a bigger engine. In terms of performance, 2009 Zenvo ST1 (1,104 HP) has 689 more horse power than 1997 Dodge Viper. (415 HP) In normal driving conditions, 2009 Zenvo ST1 should accelerate faster than 1997 Dodge Viper. With that said, vehicle weight also plays an important factor in acceleration. 1997 Dodge Viper weights approximately 130 kg more than 2009 Zenvo ST1.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Zenvo ST1 (1,430 Nm) has 766 more torque (in Nm) than 1997 Dodge Viper. (664 Nm). This means 2009 Zenvo ST1 will have an easier job in driving up hills or pulling heavy equipment than 1997 Dodge Viper.
Compare all specifications:
| 1997 Dodge Viper | 2009 Zenvo ST1 | |
| Make | Dodge | Zenvo |
| Model | Viper | ST1 |
| Year Released | 1997 | 2009 |
| Body Type | Roadster | Coupe |
| Engine Position | Front | Middle |
| Engine Size | 7986 cc | 7000 cc |
| Engine Cylinders | 10 cylinders | 8 cylinders |
| Engine Type | V | V |
| Horse Power | 415 HP | 1104 HP |
| Torque | 664 Nm | 1430 Nm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1506 kg | 1376 kg |
| Vehicle Length | 4450 mm | 4665 mm |
| Vehicle Width | 1930 mm | 2041 mm |
| Vehicle Height | 1120 mm | 1198 mm |
| Wheelbase Size | 2450 mm | 3055 mm |
