1997 Donkervoort D8 vs. 2010 Audi R8
To start off, 2010 Audi R8 is newer by 13 year(s). Which means there will be less support and parts availability for 1997 Donkervoort D8. In addition, the cost of maintenance, including insurance, on 1997 Donkervoort D8 would be higher. At 4,200 cc (8 cylinders), 2010 Audi R8 is equipped with a bigger engine. In terms of performance, 2010 Audi R8 (420 HP @ 7800 RPM) has 282 more horse power than 1997 Donkervoort D8. (138 HP @ 6750 RPM) In normal driving conditions, 2010 Audi R8 should accelerate faster than 1997 Donkervoort D8.
Because 2010 Audi R8 is all wheel drive (AWD), it will have significant more traction and grip than 1997 Donkervoort D8. In wet, icy, snow, or gravel driving conditions, 2010 Audi R8 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Audi R8 (429 Nm @ 4500 RPM) has 259 more torque (in Nm) than 1997 Donkervoort D8. (170 Nm @ 5250 RPM). This means 2010 Audi R8 will have an easier job in driving up hills or pulling heavy equipment than 1997 Donkervoort D8.
Compare all specifications:
| 1997 Donkervoort D8 | 2010 Audi R8 | |
| Make | Donkervoort | Audi |
| Model | D8 | R8 |
| Year Released | 1997 | 2010 |
| Engine Position | Front | Middle |
| Engine Size | 1796 cc | 4200 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 138 HP | 420 HP |
| Engine RPM | 6750 RPM | 7800 RPM |
| Torque | 170 Nm | 429 Nm |
| Torque RPM | 5250 RPM | 4500 RPM |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Rear | AWD |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 2 seats |
| Vehicle Length | 3420 mm | 4435 mm |
| Vehicle Width | 1740 mm | 1905 mm |
| Vehicle Height | 1110 mm | 1252 mm |
| Wheelbase Size | 2310 mm | 2649 mm |
