1998 Abarth Stola vs. 1972 Porsche 914
To start off, 1998 Abarth Stola is newer by 26 year(s). Which means there will be less support and parts availability for 1972 Porsche 914. In addition, the cost of maintenance, including insurance, on 1972 Porsche 914 would be higher. At 1,994 cc (4 cylinders), 1998 Abarth Stola is equipped with a bigger engine. In terms of performance, 1998 Abarth Stola (276 HP @ 6500 RPM) has 168 more horse power than 1972 Porsche 914. (108 HP @ 5850 RPM). In normal driving conditions, 1998 Abarth Stola should accelerate faster than 1972 Porsche 914. With that said, vehicle weight also plays an important factor in acceleration. 1972 Porsche 914 weights approximately 140 kg more than 1998 Abarth Stola.
Because 1998 Abarth Stola is four wheel drive (4WD), it will have significant more traction and grip than 1972 Porsche 914. In wet, icy, snow, or gravel driving conditions, 1998 Abarth Stola will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Abarth Stola (345 Nm @ 5000 RPM) has 185 more torque (in Nm) than 1972 Porsche 914. (160 Nm @ 4200 RPM). This means 1998 Abarth Stola will have an easier job in driving up hills or pulling heavy equipment than 1972 Porsche 914.
Compare all specifications:
1998 Abarth Stola | 1972 Porsche 914 | |
Make | Abarth | Porsche |
Model | Stola | 914 |
Year Released | 1998 | 1972 |
Engine Size | 1994 cc | 1991 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | boxer | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 276 HP | 108 HP |
Engine RPM | 6500 RPM | 5850 RPM |
Torque | 345 Nm | 160 Nm |
Torque RPM | 5000 RPM | 4200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 800 kg | 940 kg |
Vehicle Length | 4460 mm | 3990 mm |
Vehicle Width | 1890 mm | 1660 mm |
Vehicle Height | 1210 mm | 1230 mm |