1998 Beijing BJ 2020 vs. 1963 Lancia Fulvia

To start off, 1998 Beijing BJ 2020 is newer by 35 year(s). Which means there will be less support and parts availability for 1963 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Fulvia would be higher. At 2,444 cc (4 cylinders), 1998 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 1963 Lancia Fulvia (87 HP @ 6000 RPM) has 4 more horse power than 1998 Beijing BJ 2020. (83 HP @ 3800 RPM) In normal driving conditions, 1963 Lancia Fulvia should accelerate faster than 1998 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 1998 Beijing BJ 2020 weights approximately 480 kg more than 1963 Lancia Fulvia.

Because 1998 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1963 Lancia Fulvia. In wet, icy, snow, or gravel driving conditions, 1998 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Beijing BJ 2020 (173 Nm @ 2200 RPM) has 59 more torque (in Nm) than 1963 Lancia Fulvia. (114 Nm @ 4500 RPM). This means 1998 Beijing BJ 2020 will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Fulvia.

Compare all specifications:

1998 Beijing BJ 2020 1963 Lancia Fulvia
Make Beijing Lancia
Model BJ 2020 Fulvia
Year Released 1998 1963
Engine Size 2444 cc 1298 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line V
Horse Power 83 HP 87 HP
Engine RPM 3800 RPM 6000 RPM
Torque 173 Nm 114 Nm
Torque RPM 2200 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Front
Transmission Type Manual Manual
Vehicle Weight 1550 kg 1070 kg
Vehicle Length 3870 mm 4120 mm
Vehicle Width 1760 mm 1560 mm
Vehicle Height 1880 mm 1400 mm
Wheelbase Size 2310 mm 2510 mm