1998 BMW V12 vs. 2010 Fiat 500

To start off, 2010 Fiat 500 is newer by 12 year(s). Which means there will be less support and parts availability for 1998 BMW V12. In addition, the cost of maintenance, including insurance, on 1998 BMW V12 would be higher. At 6,000 cc (12 cylinders), 1998 BMW V12 is equipped with a bigger engine. In terms of performance, 1998 BMW V12 (570 HP @ 7400 RPM) has 496 more horse power than 2010 Fiat 500. (74 HP @ 4000 RPM). In normal driving conditions, 1998 BMW V12 should accelerate faster than 2010 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1998 BMW V12 weights approximately 559 kg more than 2010 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1998 BMW V12 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1998 BMW V12. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 BMW V12 (909 Nm) has 764 more torque (in Nm) than 2010 Fiat 500. (145 Nm). This means 1998 BMW V12 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat 500. 1998 BMW V12 has automatic transmission and 2010 Fiat 500 has manual transmission. 2010 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 BMW V12 will be easier to drive especially in heavy traffic.

Compare all specifications: