1998 Cadillac Catera vs. 1963 Lancia Fulvia
To start off, 1998 Cadillac Catera is newer by 35 year(s). Which means there will be less support and parts availability for 1963 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Fulvia would be higher. At 2,960 cc (6 cylinders), 1998 Cadillac Catera is equipped with a bigger engine. In terms of performance, 1998 Cadillac Catera (200 HP @ 6000 RPM) has 113 more horse power than 1963 Lancia Fulvia. (87 HP @ 6000 RPM). In normal driving conditions, 1998 Cadillac Catera should accelerate faster than 1963 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1998 Cadillac Catera weights approximately 635 kg more than 1963 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1998 Cadillac Catera is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1998 Cadillac Catera. However, in wet, icy, snow, or gravel driving conditions, 1963 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Cadillac Catera (260 Nm @ 3600 RPM) has 146 more torque (in Nm) than 1963 Lancia Fulvia. (114 Nm @ 4500 RPM). This means 1998 Cadillac Catera will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Fulvia. 1998 Cadillac Catera has automatic transmission and 1963 Lancia Fulvia has manual transmission. 1963 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Cadillac Catera will be easier to drive especially in heavy traffic.
Compare all specifications:
1998 Cadillac Catera | 1963 Lancia Fulvia | |
Make | Cadillac | Lancia |
Model | Catera | Fulvia |
Year Released | 1998 | 1963 |
Engine Position | Front | Front |
Engine Size | 2960 cc | 1298 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 200 HP | 87 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 260 Nm | 114 Nm |
Torque RPM | 3600 RPM | 4500 RPM |
Engine Bore Size | 86 mm | 77 mm |
Engine Stroke Size | 85 mm | 69.7 mm |
Engine Compression Ratio | 10.0:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 204 km/hour | 164 km/hour |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1705 kg | 1070 kg |
Vehicle Length | 4890 mm | 4120 mm |
Vehicle Width | 1790 mm | 1560 mm |
Vehicle Height | 1440 mm | 1400 mm |
Wheelbase Size | 2940 mm | 2510 mm |
Fuel Tank Capacity | 68 L | 42 L |