1998 Chrysler Concorde vs. 1977 Chrysler 1610
To start off, 1998 Chrysler Concorde is newer by 21 year(s). Which means there will be less support and parts availability for 1977 Chrysler 1610. In addition, the cost of maintenance, including insurance, on 1977 Chrysler 1610 would be higher. At 3,518 cc (6 cylinders), 1998 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 1998 Chrysler Concorde (234 HP @ 6000 RPM) has 124 more horse power than 1977 Chrysler 1610. (110 HP @ 5800 RPM). In normal driving conditions, 1998 Chrysler Concorde should accelerate faster than 1977 Chrysler 1610. With that said, vehicle weight also plays an important factor in acceleration. 1998 Chrysler Concorde weights approximately 480 kg more than 1977 Chrysler 1610. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Chrysler 1610 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Chrysler 1610. However, in wet, icy, snow, or gravel driving conditions, 1998 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Chrysler Concorde (327 Nm @ 4400 RPM) has 168 more torque (in Nm) than 1977 Chrysler 1610. (159 Nm @ 3400 RPM). This means 1998 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler 1610. 1998 Chrysler Concorde has automatic transmission and 1977 Chrysler 1610 has manual transmission. 1977 Chrysler 1610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
1998 Chrysler Concorde | 1977 Chrysler 1610 | |
Make | Chrysler | Chrysler |
Model | Concorde | 1610 |
Year Released | 1998 | 1977 |
Engine Position | Front | Front |
Engine Size | 3518 cc | 1981 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 234 HP | 110 HP |
Engine RPM | 6000 RPM | 5800 RPM |
Torque | 327 Nm | 159 Nm |
Torque RPM | 4400 RPM | 3400 RPM |
Engine Bore Size | 96 mm | 91.7 mm |
Engine Stroke Size | 81 mm | 75 mm |
Engine Compression Ratio | 9.9:1 | 9.5:1 |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1605 kg | 1125 kg |
Vehicle Length | 5280 mm | 4540 mm |
Vehicle Width | 1900 mm | 1740 mm |
Vehicle Height | 1420 mm | 1450 mm |
Wheelbase Size | 2880 mm | 2680 mm |
Fuel Tank Capacity | 75 L | 65 L |